tai-saw technology co., ltd. fr-71s03-01 tst dcc release document tai-saw technology co., ltd. no. 3, industrial 2nd rd., ping-chen industrial district, tao-yuan, 324, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales@mail.taisaw.com web: www.taisaw.com approval sheet for product specification issued date: product name: 325 mhz if saw filter (smd 7.05.0 mm) tst parts no.: TB0398A customer parts no.: company: division: approved by : date: checked by: andy lee approval by: francis chen date: 2006,11,01
tai-saw technology co., ltd. 2 tst dcc release document tai-saw technology co., ltd. no.3, industrial 2nd rd., ping-chen industri al district, taoyuan, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales3@mail.taisaw.com web: www.taisaw.com saw filter 325mhz (smd 7.05.0 mm) model no.: TB0398A rev. no. 2 a. maximum rating: 1.operating temperat ure: -10c to 60c 2.storage temperatur e: -40c to 85c b. characteristics : 1.ambient temperature : 23c item unit min. type. max. center frequency, fc mhz - 325 - insertion loss, il db - 9.6 14 lower 3 db bandedge upper 3 db bandedge mhz - 330.0 318.3 331.3 320.0 - lower 40 db bandedge upper 40 db bandedge mhz 307.5 - 312.8 337.4 - 342.5 amplitude ripple (321~329 mhz) db - 0.4 1 phase linearity (320~330 mhz) deg - 5 - group delay ripple (320~330 mhz) nsec - 24 75 relative attenuation 10 - 220 mhz 220 - 300 mhz 350 - 355 mhz 355 - 375 mhz 375 - 380 mhz 380 - 405 mhz 405 - 500 mhz db db db db db db db 45 40 40 35 40 35 40 - 50 46 48 48 51 49 48 source impedance ohm - 50 - load impedance ohm - 50 - temperature coefficient ppm/ o c -75 substrate material - - 128 linbo3 -
tai-saw technology co., ltd. 3 tst dcc release document c. frequency characteristics : (1) s21 response:(span 100mhz) horizontal: 100mhz/div vertical: 10db/div (2) pass band response:(span 20mhz) horizontal : 0.3mhz/div vertical 1: 1db/div vertical 2: 100ns/div
tai-saw technology co., ltd. 4 tst dcc release document (3) wide band response:(span 400 mhz) horizontal : 40mhz/div vertical : 10db/div d. outline drawing: pin d : balanced input + pin c : balanced input - pin j : blanced onput + pin i : blanced onput - pin a, b, e, f, g, h, k, l : to be ground : week code (follow the table from planner each year) unit : mm : product / year code 3 9 8
tai-saw technology co., ltd. 5 tst dcc release document year 2005 2009 2006 2010 2007 2011 2008 2012 product code b b b b e. test fixture : f. pcb footprint:
tai-saw technology co., ltd. 6 tst dcc release document g. packing: 1. reel dimension 2. tape dimension direction of feet 3 9 8
|